Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER

COMBINATION METER > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 3 COMBINATION METER CASE


2. INSTALL NO. 1 COMBINATION METER REFLECTOR


    E190715
  1. Engage the clip and 9 guides to install the No. 1 combination meter reflector as shown in the illustration.



3. INSTALL NO. 3 METER LENS


    E190744
  1. Engage the 2 guides to install the No. 3 meter lens.



4. INSTALL NO. 2 METER LENS


    E190711
  1. Engage the 2 guides to install the No. 2 meter lens.



5. INSTALL COMBINATION METER CASE


    E190710
  1. Engage the 2 guides to install the combination meter case.



6. INSTALL NO. 3 METER CIRCUIT PLATE


    E190709
  1. Engage the 2 guides to install the No. 3 meter circuit plate.



7. INSTALL NO. 4 METER CIRCUIT PLATE


    E190701
  1. Connect the connector to install the No. 4 meter circuit plate to the No. 3 meter circuit plate.



8. INSTALL NO. 1 METER LENS


    E190708
  1. Engage the 2 guides to install the No. 1 meter lens.



9. INSTALL NO. 2 COMBINATION METER CASE


    E190707
  1. Engage the 2 guides to install the No. 2 combination meter case.



10. INSTALL NO. 2 METER CIRCUIT PLATE


    E190706
  1. Connect the connector to install the No. 5 meter circuit plate to the No. 2 meter circuit plate.



    E190704
  1. Engage the 2 guides to install the No. 2 meter circuit plate.



    E190703
  1. Connect the connector as shown in the illustration.



11. INSTALL NO. 4 COMBINATION METER COVER


    E190699
  1. Engage the 6 claws.



    E190698
  1. Install the No. 4 combination meter cover with the 7 screws.



12. INSTALL NO. 1 COMBINATION METER COVER


    E190697
  1. Engage the 2 guides to install the No. 1 combination meter cover.



13. INSTALL NO. 2 COMBINATION METER COVER


    E190696
  1. Engage the 2 guides to install the No. 2 combination meter cover.



14. INSTALL METER CIRCUIT PLATE


    E190695
  1. Engage the 2 guides to install the meter circuit plate.



    E190694
  1. Connect the connector as shown in the illustration.



15. INSTALL NO. 3 COMBINATION METER COVER


    E190692
  1. Engage the 7 claws and 2 guides.



    E190691
  1. Install the No. 3 combination meter cover with the 3 screws.



16. INSTALL INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    E190690
  1. Install the instrument panel finish panel sub-assembly with the 6 screws.