Home › Vehicle Interior › METER / GAUGE / DISPLAY › HEADUP DISPLAY

HEADUP DISPLAY > DISASSEMBLY

for Preparation Click here


NOTICE:
When disassembling the headup display, eliminate static electricity by touching the vehicle body to prevent components from being damaged.



1. REMOVE COMBINATION METER MIRROR GLASS


    E113764
  1. Remove the 3 screws and combination meter mirror glass.



2. REMOVE NO. 1 COMBINATION METER MIRROR CASE


    E190652
  1. Remove the 2 screws.

  1. Disengage the 3 claws to remove the No. 1 combination meter mirror case.



3. REMOVE COMBINATION METER MIRROR


    E190653
  1. Disconnect the connector.

  1. Remove the 2 screws and combination meter mirror.



4. REMOVE NO. 1 COMBINATION METER MIRROR PLATE


    E190654
  1. Disengage the 2 claws and remove the No. 1 combination meter mirror plate as shown in the illustration.



5. REMOVE NO. 2 COMBINATION METER MIRROR


    E190656
  1. Remove the No. 2 combination meter mirror as shown in the illustration.



6. REMOVE NO. 2 COMBINATION METER MIRROR PLATE


    E190658
  1. Remove the 4 screws.

  1. Disengage the 2 guides to remove the No. 2 combination meter mirror plate.



7. REMOVE NO. 2 COMBINATION METER MIRROR WIRE


    E190659
  1. Disengage the 3 clamps.



    E190660
  1. Disengage the 2 guides as shown in the illustration.



    E190662
  1. Disconnect the connector to remove the No. 2 combination meter mirror wire.



8. REMOVE COMBINATION METER MIRROR ECU


    E190663
  1. Disconnect the connector to remove the combination meter mirror ECU as shown in the illustration.



9. REMOVE COMBINATION DISPLAY


    E190665
  1. Remove the 3 screws and combination display.



    E190668
  1. Disconnect the connector and remove the No. 2 combination meter mirror wire from the combination display as shown in the illustration.



10. REMOVE NO. 2 COMBINATION METER MIRROR CASE