Home › Steering › STEERING GEAR / LINKAGE › STEERING GEAR

STEERING GEAR > DISASSEMBLY

for Preparation Click here



1. REMOVE STEERING RACK BOOT CLIP LH
  1. Using pliers, remove the steering rack boot clip LH.



2. REMOVE STEERING RACK BOOT CLIP RH

HINT:
Perform the same procedure as for the LH side.



3. REMOVE NO. 2 STEERING RACK BOOT CLAMP


    C110164
  1. Using a screwdriver, remove the No. 2 steering rack boot clamp.

    NOTICE:
    Be careful not to damage the steering rack boot.



4. REMOVE NO. 1 STEERING RACK BOOT CLAMP

HINT:
Perform the same procedure as for the No. 2 steering rack boot clamp.



5. REMOVE STEERING RACK BOOT LH


6. REMOVE STEERING RACK BOOT RH