Home › Audio / Visual / Telematics › CELLULAR COMMUNICATION › SAFETY CONNECT SYSTEM

SAFETY CONNECT SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK DCM (TELEMATICS TRANSCEIVER)

E192470E09


Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
L144-1 (+B) - L144-4 (E)
SB - BR
Auxiliary battery power supply
Power switch off
11 to 14 V
L144-2 (SPI+) - L144-4 (E)
LG - BR
Sound signal
Audio system is playing
A waveform synchronized with sound is output
L144-3 (SPI-) - L144-4 (E)
L - BR
Sound signal
Audio system is playing
A waveform synchronized with sound is output
L144-4 (E) - Body ground
BR - Body ground
Ground
Always
Below 1 V
L144-5 (SPO+) - L144-4 (E)
LG - BR
Sound signal
Audio system is playing, or Emergency call mode
A waveform synchronized with sound is output
L144-6 (SPO-) - L144-4 (E)
L - BR
Sound signal
Audio system is playing, or Emergency call mode
A waveform synchronized with sound is output
L144-7 (IG2) - L144-4 (E)
L - BR
IG power supply
Power switch on (IG)
11 to 14 V
Power switch off
Below 1 V
L144-8 (ACC) - L144-4 (E)
GR - BR
ACC power supply
Power switch on (ACC)
11 to 14 V
Power switch off
Below 1 V
L144-9 (SLED) - L144-4 (E)
G - BR
Manual (SOS) switch illumination signal
Power switch on (ACC)
11 to 14 V
Power switch off
Below 1 V
L144-10 (SPDP) - L144-4 (E)
V - BR
Vehicle speed signal
See "Vehicle Signal Check Mode" (Click here)
-
L144-11 (IND1) - L144-4 (E)
B - BR
Manual (SOS) switch red indicator illumination signal
For 2 seconds after turning the Power switch on (ACC)
1 to 8.5 V
Power switch off
Below 1 V
L144-12 (IND2) - L144-4 (E)
P - BR
Manual (SOS) switch green indicator illumination signal
For 2 seconds after turning the Power switch on (ACC)
1 to 8.5 V
Power switch off
Below 1 V
L144-13 (BBI-)
L
BUB (Back-Up Battery) power supply
-
-
L144-17 (MUTE) - L144-4 (E)
G - BR
Mute signal
Audio system is playing
3.5 V or higher
Emergency call mode
Below 1 V
L144-18 (MCO+) - L144-4 (E)
B - BR
Sent microphone voice signal
See "Microphone & Voice Recognition Check" (Click here)
-
L144-19 (MCO-) - L144-4 (E)
W - BR
Sent microphone voice signal
See "Microphone & Voice Recognition Check" (Click here)
-
L144-20 (CTR1)
BE
BUB (Back-Up Battery) control line
-
-
L144-21 (CTR2)
BR
BUB (Back-Up Battery) control line
-
-
L144-23 (ILL+) - L144-4 (E)
G - BR
Illumination signal
Light control switch off
Below 1 V
Light control switch tail or ON
11 to 14 V
L144-24 (GSW) - L144-4 (E)
R - BR
Collision detection signal
Power switch on (IG)
Pulse generation
(Refer to waveform 1)
L144-25 (SIL)
P
Serial communication signal
-
-
L144-26 (SIG-) - L144-4 (E)
LG - BR
Ground
Always
Below 1 V
L144-27 (SIG1) - L144-4 (E)
SB - BR
Manual (SOS) switch condition signal
Manual (SOS) switch not pressed
1.5 to 2.0 V
Manual (SOS) switch pressed
0.5 to 0.8 V
L144-30 (BBI+)
Y
BUB (Back-Up Battery) power supply
-
-
L144-32 (SGND) - L144-4 (E)
Shield - BR
Shield ground
Always
Below 1 V
L144-33 (MCVD) - L144-4 (E)
R - BR
Telephone microphone assembly power supply
Power switch off
Below 1 V
Power switch on (IG)
4 to 6 V
L144-34 (MCI+) - L144-4 (E)
B - BR
Receive microphone voice signal
See "Microphone & Voice Recognition Check" (Click here)
-
L144-35 (MCI-) - L144-4 (E)
W - BR
Receive microphone voice signal
See "Microphone & Voice Recognition Check" (Click here)
-


    E165239E01
  1. Oscilloscope waveform:

    1. Waveform 1
      Item
      Condition
      Tester connection
      L144-24 (GSW) - L144-4 (E)
      Tool setting
      5.0 V/DIV., 20 ms/DIV.
      Vehicle condition
      Power switch on (IG)


CHECK NAVIGATION ECU SUB-ASSEMBLY (Click here)

CHECK STEREO COMPONENT AMPLIFIER ASSEMBLY (Click here)