Home › Vehicle Interior › SEAT › POWER SEAT SWITCH

POWER SEAT SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT SEAT ASSEMBLY
(Click here)


2. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD


    B251950
  1. Remove the screw.

  1. Disengage the guide, 2 claws and clip, and remove the front inner No. 1 seat cushion shield.



3. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY


    B299213
  1. Disconnect the 4 connectors.

  1. Disengage the 6 clamps and disconnect the No. 1 front seat wire.



    B310734
  1. Disengage the clip.

  1. Disengage the guide as shown in the illustration.

  1. Disengage the 5 claws and disconnect the front seat cushion shield assembly.



    B252104
  1. Disconnect the 2 connectors.

  1. Disengage the clamp and remove the front seat cushion shield assembly.



4. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    B251954
  1. Using a moulding remover, disengage the 4 claws and remove the slide and vertical power seat switch knob.



5. REMOVE RECLINING POWER SEAT SWITCH KNOB


    B251952
  1. Using a moulding remover, disengage the 4 claws and remove the reclining power seat switch knob.



6. REMOVE FRONT POWER SEAT SWITCH


    B269631
  1. Remove the 3 screws and front power seat switch.