LUMBAR SWITCH > REMOVAL |
| 1. REMOVE FRONT SEAT ASSEMBLY |
| 2. REMOVE FRONT INNER NO. 1 SEAT CUSHION SHIELD |
![]() |
Remove the screw.
Disengage the guide, 2 claws and clip, and remove the front inner No. 1 seat cushion shield.
| 3. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY |
![]() |
Disconnect the 4 connectors.
Disengage the 6 clamps and disconnect the No. 1 front seat wire.
![]() |
Disengage the clip.
Disengage the guide as shown in the illustration.
Disengage the 5 claws and disconnect the front seat cushion shield assembly.
![]() |
Disconnect the 2 connectors.
Disengage the clamp and remove the front seat cushion shield assembly.
| 4. REMOVE LUMBAR SWITCH (POWER SEAT SWITCH ASSEMBLY) |
![]() |
Disengage the 4 claws and remove the lumbar switch (power seat switch assembly).