Home
›
Engine / Hybrid System
›
2ZR-FXE LUBRICATION
›
OIL PUMP
OIL PUMP > INSTALLATION > Preparation
SST
09213-58014
Crankshaft Pulley Holding Tool
(91551-80840)
Bolt
09223-22010
Crankshaft Front Oil Seal
Replacer
09330-00021
Companion Flange Holding Tool
EQUIPMENT
27 mm socket wrench
-
24 mm deep socket wrench
-
Ohmmeter
-
Oil pressure gauge
-
Precision straight edge
-
Torque wrench
-
Protective tape
-
Wooden block
-
Feeler gauge
-
LUBRICANT / Standard Oil Grade (For USA)
Oil Grade
Oil Viscosity (SAE)
ILSAC multigrade engine oil
0W-20
LUBRICANT / Standard Oil Grade (For Canada)
Oil Grade
Oil Viscosity (SAE)
ILSAC multigrade engine oil
0W-20 5W-20 (0W-20 is best choice for fuel economy and good starting in cold weather.)
LUBRICANT / Standard Capacity
Item
Standard Condition
Drain and refill with oil filter change
4.2 liters (4.4 US qts, 3.7 lmp. qts)
Drain and refill without oil filter change
3.9 liters (4.1 US qts, 3.4 lmp. qts)
Dry fill
4.7 liters (5.0 US qts, 4.1 lmp. qts)
RECOMMENDED TOOLS
09091-1C100
Oil Pan Seal Cutter
-
SSM
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
-
Toyota Genuine Seal Packing Block, Three Bond 1207B or equivalent
-
Toyota Genuine Seal Packing 1282B, Three Bond 1282B or equivalent
-