Home › Engine / Hybrid System › 2ZR-FXE LUBRICATION › OIL PUMP

OIL PUMP > REMOVAL > Preparation



SST 
I105035
09213-58014
Crankshaft Pulley Holding Tool


I000574
(91551-80840)
Bolt


I000032
09330-00021
Companion Flange Holding Tool


I031012
09950-50013
Puller C Set


I002191
(09951-05010)
Hanger 150


I002192
(09952-05010)
Slide Arm


I002194
(09953-05020)
Center Bolt 150


I031005
(09954-05021)
Claw No. 2




EQUIPMENT
27 mm socket wrench
-
24 mm deep socket wrench
-
Ohmmeter
-
Oil pressure gauge
-
Precision straight edge
-
Torque wrench
-
Protective tape
-
Wooden block
-
Feeler gauge
-


LUBRICANT / Standard Oil Grade (For USA)
Oil Grade
Oil Viscosity (SAE)
ILSAC multigrade engine oil 0W-20

LUBRICANT / Standard Oil Grade (For Canada)
Oil Grade
Oil Viscosity (SAE)
ILSAC multigrade engine oil 0W-20 5W-20 (0W-20 is best choice for fuel economy and good starting in cold weather.)

LUBRICANT / Standard Capacity
Item
Standard Condition
Drain and refill with oil filter change
4.2 liters (4.4 US qts, 3.7 lmp. qts)
Drain and refill without oil filter change
3.9 liters (4.1 US qts, 3.4 lmp. qts)
Dry fill
4.7 liters (5.0 US qts, 4.1 lmp. qts)


RECOMMENDED TOOLS
I102218
09091-1C100
Oil Pan Seal Cutter
-


SSM
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
-
Toyota Genuine Seal Packing Block, Three Bond 1207B or equivalent
-
Toyota Genuine Seal Packing 1282B, Three Bond 1282B or equivalent
-