Home › Engine / Hybrid System › 2ZR-FXE LUBRICATION › OIL AND OIL FILTER

OIL AND OIL FILTER > REPLACEMENT > Preparation



SST 
I002370
09228-06501
Oil Filter Wrench




EQUIPMENT
27 mm socket wrench
-
24 mm deep socket wrench
-
Ohmmeter
-
Oil pressure gauge
-
Precision straight edge
-
Torque wrench
-
Protective tape
-
Wooden block
-
Feeler gauge
-


LUBRICANT / Standard Oil Grade (For USA)
Oil Grade
Oil Viscosity (SAE)
ILSAC multigrade engine oil 0W-20

LUBRICANT / Standard Oil Grade (For Canada)
Oil Grade
Oil Viscosity (SAE)
ILSAC multigrade engine oil 0W-20 5W-20 (0W-20 is best choice for fuel economy and good starting in cold weather.)

LUBRICANT / Standard Capacity
Item
Standard Condition
Drain and refill with oil filter change
4.2 liters (4.4 US qts, 3.7 lmp. qts)
Drain and refill without oil filter change
3.9 liters (4.1 US qts, 3.4 lmp. qts)
Dry fill
4.7 liters (5.0 US qts, 4.1 lmp. qts)


RECOMMENDED TOOLS
I102218
09091-1C100
Oil Pan Seal Cutter
-


SSM
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
-
Toyota Genuine Seal Packing Block, Three Bond 1207B or equivalent
-
Toyota Genuine Seal Packing 1282B, Three Bond 1282B or equivalent
-