Home
›
Vehicle Exterior
›
EXTERIOR PANELS / TRIM
›
FRONT DOOR BELT MOULDING
FRONT DOOR BELT MOULDING > REMOVAL > Preparation
EQUIPMENT
Clip remover
Protective tape
Strap
Heat light
Cutter or other similar tool
Torque wrench
Double-sided tape
Tape
Squeegee
String
LUBRICANT
MP grease
-
RECOMMENDED TOOLS
09061-1C300
Set, Moulding Remover
(09061-1C340)
Remover D, Moulding
SSM
Adhesive, 3M DP-105 or equivalent
-