LIGHTING SYSTEM > DETAILS



FUNCTION
  1. Illuminated entry control function

    1. When any one of the following conditions is satisfied, the illuminated entry system turns on the front interior light (map light assembly) and power switch illumination.

      1. Any door is opened.
      2. Any door is unlocked.
      3. A key enters any exterior actuation area of the door electrical key oscillator.
      4. All doors are closed and the power switch is turned from on to off.

    2. Customize parameters can be configured by means of the customized body electronics system. For details, refer to the Repair Manual.

  2. Battery saving function

    1. A battery saving function is used to automatically turn off the front interior light (map light assembly), No. 1 luggage compartment light assembly and power switch illumination when the following condition occurs continuously for over 20 minutes:

      1. The power switch is off when any door is either ajar or open.