LIGHTING SYSTEM > DETAILS |
| FUNCTION |
Illuminated entry control function
When any one of the following conditions is satisfied, the illuminated entry system turns on the front interior light (map light assembly), dome light (No. 1 room light assembly) and power switch illumination.
Customize parameters can be configured by means of the customized body electronics system. For details, refer to the Repair Manual.
Battery saving function
A battery saving function is used to automatically turn off the front interior light (map light assembly), dome light (No. 1 room light assembly) and No. 1 luggage compartment light assembly and power switch illumination when the following condition occurs continuously for over 20 minutes: