POWER DOOR LOCK CONTROL SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS
  1. The main components in the power door lock control system have the following functions:

    Component
    Function
    Door Courtesy Light Switch Assembly
    Detects whether the doors are open or closed and sends this information to the main body ECU (multiplex network body ECU).
    Door Lock Assembly
    Door Lock Position Switch
    Detects whether the doors are locked or unlocked and sends this information to the main body ECU (multiplex network body ECU).
    Door Lock Motor
    Drives the motor in response to signals from the main body ECU (multiplex network body ECU) and locks or unlocks the doors.
    Key-linked Switch
    Sends a lock or unlock request signal to the main body ECU (multiplex network body ECU) by the ignition key.
    Back Door Lock Assembly
    Back Door Courtesy Light Switch
    Detects whether the back door is open or closed and sends this information to the main body ECU (multiplex network body ECU).
    Door Lock Motor
    Drives the motor in response to signals from the main body ECU (multiplex network body ECU) and releases the back door latch.
    Back Door Opener Switch Assembly
    Sends back door opener switch signals to the certification ECU (smart key ECU assembly).
    Power Window Regulator Master Switch Assembly
    Door Lock Switch
    Sends manual lock and unlock request signals to the main body ECU (multiplex network body ECU).
    Certification ECU (Smart Key ECU Assembly)
    Sends the back door opener switch signals to the main body ECU (multiplex network body ECU).
    Combination Meter Assembly
    Receives signals from the speed sensor and sends the vehicle speed signal to the main body ECU (multiplex network body ECU).
    Main Body ECU (Multiplex Network Body ECU)
    Drives all door lock motors in response to signals.


FUNCTION
  1. The power door lock control system has the following functions:

    Function
    Outline
    Manual Lock and Unlock
    This function can lock or unlock all doors by operation of the door lock switch.
    Manual Unlock Prohibition
    Performing the door lock operation with a door control transmitter will prohibit the doors from being unlocked by the door lock control switch.
    Key-linked Lock and Unlock
    This function, linked with the driver door key cylinder, can lock or unlock all the doors when a lock or unlock operation is effected.
    Key Confinement Prevention
    When the electrical key transmitter sub-assembly is present in the interior detection area and a door lock operation is performed while the driver door is open, all the doors will be unlocked.
    Back Door Open
    Pressing the back door opener switch when the back door is unlocked will open the back door.