SEAT ASSEMBLY > DETAILS



FUNCTION


  1. Whiplash Reducing Structure



    1. A structure, which provides support for the whole area from the head to the waist at the same time during a collision while providing a thick seat back pad, is used to help reduce whiplash injury.


      Y118178E01


      Text in Illustration 
      *1
      Seat Back Side Frame
      -
      -
      V100135
      Impact Direction (Downward Force Acting from Center of Back to Waist)
      V100136
      Impact Direction (Downward Force Acting on Upper Back)

    2. The side frame shape of the seat back assembly has been made highly rigid. As a result, the seat back assembly can support passengers to prevent them from falling backward in a collision.



  2. Manual Lifter

    1. The front seat uses a manual lifter. The entire seat can be vertically moved by operating the vertical adjusting handle on the outer surface of the front seat cushion.



    2. The manual lifter consists of the vertical adjusting handle, lifter gear and lifter rod, thus accommodating various body types.


      Y118188E01


      Text in Illustration 
      *1
      Lifter Rod
      *2
      Lifter Gear
      *3
      Vertical Adjusting Handle
      -
      -


CONSTRUCTION


  1. Front Seat

    1. Manually adjustable front seats have been provided.



    2. The front seat back has been scooped out and made slim to offer additional knee room for rear passengers.


      Y118370E01


      Text in Illustration 
      *a
      New Models
      *b
      Conventional Models
      V100145
      Additional Knee Room for Rear Passengers
      -
      -



    3. By reducing the seat cushion pad thickness and lowering the seat rail from the floor surface level, a low hip point has been achieved. As a result, enough head clearance has been provided, resulting in the ease of getting in and out of the vehicle.


      Y118371E02


      Text in Illustration 
      *1
      Seat Cushion Pad
      *2
      Seat Rail
      *a
      A-A Cross Section
      *b
      Standard Hip Point
      *c
      Hip Point
      -
      -



  2. Rear Seat



    1. A folding function is employed in the seat back for both the 60/40 split folding type and the united folding type rear seats to improve the usability and convenience.


      Y174281E01


      Text in Illustration 
      *A
      United Folding Type Rear Seat
      *B
      60/40 Split Folding Type Rear Seat
      V100135
      Move
      -
      -



  3. Child Restraint System (CRS)

    1. ISO-FIX bars (child restraint seat anchor bracket sub-assemblies) for securing child seats have been provided behind the seat cushion of the rear seat.



    2. CRS top tether anchor bars for securing a child seat have been provided on the rear seat back frame.


      Y118181E02


      Text in Illustration 
      *A
      United Folding Rear Seat
      *B
      60/40 Split Folding Rear Seat
      *C
      RHD Models
      -
      -
      *1
      ISO-FIX Bar (Child Restraint Seat Anchor Bracket Sub-assembly)
      *2
      CRS Top Tether Anchor Bracket