Home › Engine / Hybrid System › 1NZ-FXE INTAKE / EXHAUST › EXHAUST PIPE

EXHAUST PIPE > REMOVAL

for Preparation Click here



1. REMOVE TAIL EXHAUST PIPE ASSEMBLY


    A270241
  1. Remove the 2 bolts and 2 compression springs.

  1. Remove the tail exhaust pipe assembly from the 2 exhaust pipe supports.

  1. Remove the gasket from the front exhaust pipe assembly.



2. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    A267690
  1. Remove the 2 bolts and 2 compression springs.

  1. Remove the front exhaust pipe assembly from the 3 exhaust pipe supports.

  1. Remove the gasket from the exhaust manifold.