ENGINE IMMOBILISER SYSTEM > DTC CHECK / CLEAR |
| CHECK FOR IMMOBILISER DTC |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry&Start / DTC.
Check for DTCs.
| CHECK FOR HYBRID VEHICLE CONTROL ECU DTC |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Powertrain / Hybrid Control / DTC.
Check for DTCs.
| CLEAR IMMOBILISER DTC |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry&Start / DTC.
Clear the DTCs.
| CLEAR HYBRID VEHICLE CONTROL ECU DTC |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Powertrain / Hybrid Control / DTC.
Clear the DTCs.