Home › Engine / Hybrid System › 1NZ-FXE FUEL › FUEL SENDER GAUGE ASSEMBLY

FUEL SENDER GAUGE ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL FUEL SENDER GAUGE ASSEMBLY


  1. Install the fuel sender gauge assembly by sliding it downward.


    A306882E01


    Text in Illustration 
    *A
    Type A
    *B
    Type B

    NOTICE:
    Make sure that the fuel sender gauge arm does not bend.

  1. Connect the fuel sender gauge assembly connector.



2. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
(Click here)