Home › Engine / Hybrid System › 1NZ-FXE FUEL › FUEL SENDER GAUGE ASSEMBLY

FUEL SENDER GAUGE ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
(Click here)


2. REMOVE FUEL SENDER GAUGE ASSEMBLY


A105590
  1. Disconnect the fuel sender gauge assembly connector.



  1. Release the lock as shown in the illustration and slide the fuel sender gauge assembly to remove it.


    A306881E01


    Text in Illustration 
    *A
    Type A
    *B
    Type B

    NOTICE:
    Make sure that the fuel sender gauge arm does not bend.