Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > FAIL-SAFE CHART

for Preparation Click here


HINT:
If the following conditions are detected while the cruise control system is controlling vehicle speed, the system clears the vehicle speed stored in the hybrid vehicle control ECU and cancels cruise control system control of vehicle speed.


Vehicle Condition
Auto Cancel Condition
Re-operation Condition
Cruise control indicator illuminates goes out and a warning message is displayed
Open or short in stop light switch circuit
Cruise control system is turned off and back on again using the cruise control switch (ON-OFF button).
  1. Problem with stop light switch input circuit
  2. Problem with cruise control switch cancel circuit
  3. Electronically controlled brake system operates while driving with cruise control system controlling vehicle speed
  4. Communication stop between skid control ECU and hybrid vehicle control ECU
Power switch is turned off and back to ON again.
Cruise control indicator remains illuminated
Malfunction in the hybrid control system
Cruise control system is turned off and back on again using the cruise control switch (ON-OFF button).
  1. Vehicle speed is lower than low speed limit (approximately 40 km/h (25 mph)) while driving with cruise control system controlling vehicle speed
  1. VSC system operates while driving with cruise control system controlling vehicle speed.
Cruise control switch is pushed to +/RES
Cruise control indicator remains illuminated (Cruise control system control of vehicle speed is canceled)
Vehicle speed is lower than stored speed by approximately 16 km/h (10 mph) or more
Cruise control switch is pushed to -/SET