Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY

REAR CENTER SEAT OUTER BELT ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here


CAUTION:
Be sure to follow the correct removal and installation procedures of the rear seat lap type center belt assembly.



1. INSPECT REAR SEAT LAP TYPE CENTER BELT ASSEMBLY (for Vehicle not Involved in Collision)
  1. Visually check for defects with the rear seat lap type center belt assembly installed on the vehicle.

    1. The defects are as follows:

      1. Cuts on the rear seat lap type center belt assembly
      2. Small cracks on the rear seat lap type center belt assembly
      3. Significant discoloration on the rear seat lap type center belt assembly

      OK:
      No defects are found.

      HINT:
      If any of the defects is found, replace the rear seat lap type center belt assembly with a new one.



2. INSPECT REAR SEAT LAP TYPE CENTER BELT ASSEMBLY (for Vehicle Involved in Collision)
  1. Visually check for defects with the rear seat lap type center belt assembly removed from the vehicle.

    1. The defects are as follows:

      1. Cuts on the rear seat lap type center belt assembly
      2. Small cracks on the rear seat lap type center belt assembly
      3. Significant discoloration on the rear seat lap type center belt assembly
      4. Cracks or other damage to the connector

      OK:
      No defects are found.

      HINT:
      If any of the defects is found, replace the rear seat lap type center belt assembly with a new one.