Home › Vehicle Exterior › DOOR / HATCH › HOOD

HOOD > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT HOOD SUB-ASSEMBLY


  1. Check that the clearance measurements of areas "a" through "f" are within each standard range.


    B301498E02


    Standard Clearance 
    Area
    Measurement
    Area
    Measurement
    a
    -0.85 to 3.15 mm (-0.0335 to 0.124 in.)
    b
    1.65 to 5.65 mm (0.065 to 0.222 in.)
    c
    -1.85 to 2.15 mm (-0.0728 to 0.0847 in.)
    d
    2.35 to 6.35 mm (0.0925 to 0.25 in.)
    e
    2.0 to 5.0 mm (0.0787 to 0.197 in.)
    f
    -1.5 to 1.5 mm (-0.0591 to 0.0591 in.)