AIRBAG SYSTEM > SYSTEM DESCRIPTION |
| GENERAL |
Deceleration sensors used for the airbag system are installed to various parts on the vehicle and calculate the deceleration rate of each part during a collision.
Depending on the situation, the airbag sensor assembly sends a deployment signal to each airbag and pretensioner based on the information from each sensor.
| DEPLOYMENT CONDITION |
FRONTAL COLLISION

Frontal collision signals are produced based on the information from the airbag sensor assembly and front airbag sensors.
Frontal collision signals are used to deploy the SRS parts in the diagram.
SIDE COLLISION (Pattern 1)

Side collision (Pattern 1) signals are produced based on the information from the airbag sensor assembly and side airbag sensor assembly.
Side collision (Pattern 1) signals are used to deploy the SRS parts in the diagram.
SIDE COLLISION (Pattern 2)

Side collision (Pattern 2) signals are produced based on the information from the airbag sensor assembly and side No. 2 airbag sensor assembly.
Side collision (Pattern 2) signals are used to deploy the SRS part in the diagram.