SMART ENTRY AND START SYSTEM (for Start Function) > PRECAUTION |
| 1.PRECAUTIONS WHEN USING INTELLIGENT TESTER |
When using the intelligent tester with the power switch off to troubleshoot the smart entry and start system (for Start Function):
Connect the intelligent tester to the DLC3 and turn a door courtesy light on and off at 1.5-second or less intervals until communication between the intelligent tester and vehicle begins (the intelligent tester screen changes when communication begins).
| 2.PRECAUTION FOR REGISTRATION |
If replacing any of the following parts, refer to the Service Bulletin.
Certification ECU (smart key ECU assembly)
Steering lock ECU (steering lock actuator assembly)
Electrical key transmitter sub-assembly
ID code box (immobiliser code ECU)