Component
| Function
|
Power window regulator master switch assembly
- Door control switch
| Driver door control switch on power window regulator master switch assembly locks or unlocks all doors.
|
Door control switch assembly
| Front passenger door control switch locks or unlocks all doors.
|
Door courtesy light switch assembly
| - Placed on each door.
- Detects door status (open or closed) and outputs data to main body ECU (multiplex network body ECU).
- Turns on when door is opened and turns off when door is closed.
|
Front door lock assembly LH*1 Front door lock assembly RH*2
| - Built-in motor locks or unlocks door.
- Built-in key lock and unlock switch (key-linked) detects door key operation status (locked or unlocked) and outputs a signal to main body ECU (multiplex network body ECU).
- Built-in unlock detection switch detects door status (locked or unlocked) and outputs a signal to main body ECU (multiplex network body ECU). This switch turns off when door is locked and turns on when door is unlocked.
|
Front door lock assembly RH*1 Front door lock assembly LH*2 Rear door lock assembly LH/RH
| - Built-in motor locks or unlocks door.
- Built-in unlock detection switch detects door status (locked or unlocked) and outputs a signal to main body ECU (multiplex network body ECU). This switch turns off when door is locked and turns on when door is unlocked.
|
Back door lock assembly
| - Built-in motor unlatches door latch.
- Performs back door open operation according to locked/unlocked state determination of main body ECU (multiplex network body ECU).
- Built-in courtesy switch detects back door status (open or closed) and output data to main body ECU (multiplex network body ECU) turns on when back door is opened and turns off when back door is closed
|