Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver)


    B271232E04
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    2 - 3
    Driver seat belt unfastened
    Below 1 Ω
    2 - 3
    Driver seat belt fastened
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Inner Belt Assembly (for Driver))
    If the result is not as specified, replace the front seat inner belt assembly (for driver).



2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger)


B271152E14
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    for LHD 
    Tester Connection
    Condition
    Specified Condition
    M11-3 - B-1
    Always
    Below 1 Ω
    M11-2 - B-3
    Front passenger seat belt unfastened
    Below 1 Ω
    M11-2 - B-3
    Front passenger seat belt fastened
    10 kΩ or higher
    for RHD 
    Tester Connection
    Condition
    Specified Condition
    M9-3 - B-1
    Always
    Below 1 Ω
    M9-2 - B-3
    Front passenger seat belt unfastened
    Below 1 Ω
    M9-2 - B-3
    Front passenger seat belt fastened
    10 kΩ or higher

    Text in Illustration 
    *A
    for LHD
    *B
    for RHD
    *a
    Component without harness connected
    (Front Seat Inner Belt Assembly (for Front Passenger))
    If the result is not as specified, replace the front seat inner belt assembly (for front passenger).