SEAT BELT WARNING SYSTEM > DATA LIST / ACTIVE TEST |
| DATA LIST |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Combination Meter or Main Body / Data List.
Read the Data List according to the display on the intelligent tester.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| P-Seatbelt Buckle SW | Front passenger seat belt buckle switch signal/ON or OFF | ON: Front passenger seat belt unfastened OFF: Front passenger seat belt fastened | Front passenger seat occupied |
| Driver Side Seatbelt Warning Buzzer | Driver seat belt warning buzzer/ON or OFF | Customized value displayed | - |
| P-Seatbelt Warning Buzzer | Front passenger seat belt warning buzzer/ON or OFF | Customized value displayed | - |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| D Seat Buckle SW | Driver seat belt buckle switch signal/ON or OFF | ON: Driver seat belt fastened OFF: Driver seat belt unfastened | - |
| ACTIVE TEST |
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Combination Meter / Active Test.
Perform the Active Test according to the display on the intelligent tester.
| Tester Display | Test Part | Control Range | Diagnostic Note |
| Driver Side Seat Belt | Seat belt warning light | OFF / ON | - |