Home › General › SPECIFICATIONS › 1NZ-FXE COOLING

1NZ-FXE COOLING > SERVICE DATA



THERMOSTAT 
Condition
Specified Condition
Standard valve opening temperature
80 to 84°C (176 to 183°F)
Standard valve lift
0.8 mm (0.315 in.) or more at 95°C (203°F)

COOLING FAN MOTOR 
Item
Condition
Specified Condition
Cooling fan motor
20°C (68°F) at 12 V
12.2 to 15.7 A

COOLING FAN RELAY 
Tester Connection
Condition
Specified Condition
3 - 5
Auxiliary battery voltage is not applied between terminals 1 and 2
10 kΩ or higher
3 - 5
Auxiliary battery voltage is applied between terminals 1 and 2
Below 1 Ω

WATER FILLER CAP SUB-ASSEMBLY 
Item
Tester Connection
Specified Condition
Water filler cap sub-assembly
for brand-new cap
93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2, 13.5 to 17.8 psi)
for used cap
78.5 kPa (0.8 kgf/cm2, 11.4 psi)