Home › Vehicle Exterior › HORN › HORN

HORN > INSPECTION

for Preparation Click here



1. INSPECT LOW PITCHED HORN ASSEMBLY


    E241217E01
  1. Apply an auxiliary battery voltage and check the operation of the horn according to the table below.

    OK:
    Measurement Condition
    Specified Condition
    Auxiliary battery positive (+) → Terminal A17-1
    Auxiliary battery negative (-) → Body ground
    Horn sounds

    Text in Illustration 
    *a
    Component without harness connected
    (Low Pitched Horn Assembly)
    If the result is not as specified, replace the low pitched horn assembly.