Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE

NAME PLATE > REMOVAL

for Preparation Click here


HINT:
When removing the name plates or emblems, heat the vehicle body and name plates or emblems using a heat light.

Heating Temperature 
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate or Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, name plates or emblems excessively.



1. REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM


    B307368E01
  1. Apply protective tape to the back door panel in the area around the luggage compartment door emblem.
    Text in Illustration 
    *1
    Wooden Blocks
    *2
    Protective Tape
    *3
    Location Pin

  1. Pass a piano wire between the vehicle body and luggage compartment door emblem.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the luggage compartment door emblem to the vehicle body.

    NOTICE:
    1. If reusing the luggage compartment door emblem, take care not to damage the luggage compartment door emblem.
    2. Be careful not to damage the vehicle body.

  1. Remove the luggage compartment door emblem.



2. REMOVE NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE (for LH Side)


    B310566E01
  1. Apply protective tape to the back door panel in the area around the No. 1 luggage compartment door name plate.
    Text in Illustration 
    *1
    Wooden Blocks
    *2
    Protective Tape

  1. Pass a piano wire between the vehicle body and No. 1 luggage compartment door name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the No. 1 luggage compartment door name plate to the vehicle body.

    NOTICE:
    1. If reusing the No. 1 luggage compartment door name plate, take care not to damage the No. 1 luggage compartment door name plate.
    2. Be careful not to damage the vehicle body.

  1. Remove the No. 1 luggage compartment door name plate.



3. REMOVE NO. 1 LUGGAGE COMPARTMENT DOOR NAME PLATE (for RH Side)


    B310568E01
  1. Apply protective tape to the back door panel in the area around the No. 1 luggage compartment door name plate.
    Text in Illustration 
    *1
    Wooden Blocks
    *2
    Protective Tape

  1. Pass a piano wire between the vehicle body and No. 1 luggage compartment door name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the No. 1 luggage compartment door name plate to the vehicle body.

    NOTICE:
    1. If reusing the No. 1 luggage compartment door name plate, take care not to damage the No. 1 luggage compartment door name plate.
    2. Be careful not to damage the vehicle body.

  1. Remove the No. 1 luggage compartment door name plate.



4. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE


    B310567E01
  1. Apply protective tape to the back door panel in the area around the No. 2 luggage compartment door name plate.
    Text in Illustration 
    *1
    Wooden Blocks
    *2
    Protective Tape

  1. Pass a piano wire between the vehicle body and No. 2 luggage compartment door name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body.

    NOTICE:
    1. If reusing the No. 2 luggage compartment door name plate, take care not to damage the No. 2 luggage compartment door name plate.
    2. Be careful not to damage the vehicle body.

  1. Remove the No. 2 luggage compartment door name plate.



5. REMOVE SIDE PANEL EMBLEM (for LH Side)


    B307365E01
  1. Apply protective tape to the back door panel in the area around the side panel emblem.
    Text in Illustration 
    *1
    Wooden Blocks
    *2
    Protective Tape

  1. Pass a piano wire between the vehicle body and side panel emblem.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the side panel emblem to the vehicle body.

    NOTICE:
    1. If reusing the side panel emblem, take care not to damage the side panel emblem.
    2. Be careful not to damage the vehicle body.

  1. Remove the side panel emblem.



6. REMOVE SIDE PANEL EMBLEM (for RH Side)


    B307364E01
  1. Apply protective tape to the back door panel in the area around the side panel emblem.
    Text in Illustration 
    *1
    Wooden Blocks
    *2
    Protective Tape

  1. Pass a piano wire between the vehicle body and side panel emblem.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the side panel emblem to the vehicle body.

    NOTICE:
    1. If reusing the side panel emblem, take care not to damage the side panel emblem.
    2. Be careful not to damage the vehicle body.

  1. Remove the side panel emblem.