Home › General › SPECIFICATIONS › 1NZ-FXE ENGINE CONTROL

1NZ-FXE ENGINE CONTROL > SERVICE DATA



Spark plug
Spark plug type
DENSO made
FK16R-A8
Standard electrode gap
for new spark plug
0.7 to 0.8 mm (0.0276 to 0.0315 in.)
Maximum electrode gap
for used spark plug
1.1 mm (0.0433 in.)
Camshaft timing oil control valve assembly
Resistance
1 - 2
6.9 to 7.9 Ω
Throttle body with motor assembly
Resistance
1 (M-) - 2 (M+)
0.3 to 100 Ω at 20°C (68°F)
Mass air flow meter
Standard Resistance
1 (THA) - 2 (E2)
13.6 to 18.4 kΩ at -20°C (-4°F)
1 (THA) - 2 (E2)
2.21 to 2.69 kΩ at 20°C (68°F)
1 (THA) - 2 (E2)
0.49 to 0.67 kΩ at 60°C (140°F)
Cam position sensor
Resistance
-10 to 50°C (14 to 122°F)
1630 to 2740Ω
50 to 100°C (122 to 212°F)
2065 to 3225 Ω
Crankshaft position sensor
Resistance
-10 to 50°C (14 to 122°F)
985 to 1600 Ω
50 to 100°C (122 to 212°F)
1265 to 1890 Ω
Engine coolant temperature sensor
Resistance
20°C (68°F)
2.32 to 2.59 kΩ
80°C (176°F)
0.310 to 0.326 kΩ
Knock control sensor
Resistance
at 20°C (68°F)
120 to 280 kΩ
Air fuel ratio sensor
Resistance
C17-1 (HA1A) - C17-2 (+B)
1.6 to 3.2 Ω at 20°C (68°F)
C17-1 (HA1A) - C17-4 (A1A-)
10 kΩ or higher
Heated oxygen sensor
Resistance
C16-1 (HT1B) - C16-2 (+B)
11 to 16 Ω at 20°C (68°F)
C16-1 (HT1B) - C16-4 (E2)
10 kΩ or higher
No. 1 integration relay
EFI-MAIN relay
Specified condition
(2E-1) - (2C-4)
10 kΩ or higher
(2E-1) - (2C-4)
Below 1 Ω (when auxiliary battery voltage is applied across terminals 2C-3 and 2C-2)
HORN relay
Specified condition
(2E-1) - (2C-8)
10 kΩ or higher
(2E-1) - (2C-8)
Below 1 Ω (when auxiliary battery voltage is applied across terminals 2C-6 and 2C-7)
IG2 relay
Specified condition
(2E-1) - (2D-4)
10 kΩ or higher
(2E-1) - (2D-4)
Below 1 Ω (when auxiliary battery voltage is applied across terminals 2D-2 and 2D-3)
C/OPN relay
Specified condition
(2D-5) - (2D-8)
10 kΩ or higher
(2D-5) - (2D-8)
Below 1 Ω (when auxiliary battery voltage is applied across terminals 2D-6 and 2D-7)