FRONT SHOCK ABSORBER > REMOVAL |
| 1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY |
| 2. REMOVE INNER COWL TOP TO COWL BRACE (for LHD) |
![]() |
Remove the 3 bolts and inner cowl top to cowl brace.
| 3. REMOVE INNER COWL TOP TO COWL BRACE (for RHD) |
![]() |
Remove the 3 bolts and inner cowl top to cowl brace.
| 4. REMOVE FRONT AIR SHUTTER SEAL (for LHD) |
![]() |
Disengage the clamp to remove the front air shutter seal.
| 5. REMOVE FRONT AIR SHUTTER SEAL (for RHD) |
![]() |
Disengage the clamp to remove the front air shutter seal.
| 6. REMOVE FRONT NO. 1 VENTILATOR SEAL (for LHD) |
![]() |
Disengage the clamp to remove the front No. 1 ventilator seal.
| 7. REMOVE FRONT NO. 1 VENTILATOR SEAL (for RHD) |
![]() |
Disengage the clamp to remove the front No. 1 ventilator seal.
| 8. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD) |
![]() |
Disengage the clamp to separate the wire harness from the outer cowl top panel sub-assembly.
![]() |
Remove the 8 bolts, nut and outer cowl top panel sub-assembly.
| 9. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD) |
![]() |
Disengage the 3 clamps to separate the wire harness from the outer cowl top panel sub-assembly.
![]() |
Remove the 8 bolts, nut and outer cowl top panel sub-assembly.
| 10. REMOVE FRONT WHEEL |
| 11. SEPARATE FRONT STABILIZER LINK ASSEMBLY |
![]() |
Remove the nut and separate the front stabilizer link assembly from the front shock absorber assembly.
| 12. SEPARATE FRONT FLEXIBLE HOSE |
![]() |
Remove the bolt and separate the front speed sensor and front flexible hose.
| 13. REMOVE FRONT SUSPENSION SUPPORT DUST COVER |
Remove the front suspension support dust cover.
| 14. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING |
![]() |
Support the front lower No. 1 suspension arm sub-assembly using a jack and wooden block.
| *1 | Wooden Block |
| *2 | Jack |
![]() |
Remove the 2 nuts and 2 bolts, and separate the front shock absorber with coil spring from the steering knuckle.
![]() |
Using a hexagon socket wrench, hold the front shock absorber rod and remove the nut.
Remove the front No. 2 suspension support.
Remove the front shock absorber with coil spring from the vehicle.
| 15. REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY |
| 16. REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT |
![]() |
Using a hexagon socket wrench, hold the front shock absorber rod and loosen the front support to front shock absorber nut.
![]() |
Using SST, compress the front coil spring.
Remove the front support to front shock absorber nut.
| 17. REMOVE FRONT NO. 1 SPRING BUMPER SUB-ASSEMBLY |
Remove the front No. 1 spring bumper sub-assembly from the front shock absorber assembly.
| 18. REMOVE FRONT COIL SPRING UPPER INSULATOR |
| 19. REMOVE FRONT COIL SPRING |
| 20. REMOVE FRONT SHOCK ABSORBER ASSEMBLY |
| 21. REMOVE FRONT COIL SPRING LOWER INSULATOR (w/ Front Coil Spring Lower Insulator) |
Remove the front coil spring lower insulator from the front shock absorber assembly.