FRONT SPEED SENSOR > INSTALLATION |
| 1. INSTALL FRONT SPEED SENSOR |
Install the front speed sensor onto the steering knuckle with the bolt.
Install the No. 1 clamp onto the shock absorber with the bolt and front flexible hose.
Install the No. 2 clamp onto the body with the bolt.
Engage the 2 clamps onto the body.
Install the No. 3 clamp onto the body.
Connect the front speed sensor connector.
Engage the clamp onto the body.
| 2. INSTALL FRONT FENDER LINER |
| 3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL |
| 4. CHECK FOR SPEED SENSOR SIGNAL |