OUTER MIRROR SWITCH > INSTALLATION |
| 1. INSTALL OUTER MIRROR SWITCH ASSEMBLY |
Engage the 2 claws and install the outer mirror switch assembly.
| 2. INSTALL NO. 1 SWITCH HOLE BASE |
for LHD:
Connect each connector.
![]() |
Engage the 4 claws and 2 clips to install the No. 1 switch hole base.
for RHD:
Connect each connector.
Engage the 2 claws and 3 clips to install the No. 1 switch hole base.
| 3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY |