Home › Vehicle Exterior › VEHICLE PROXIMITY NOTIFICATION SYSTEM › VEHICLE PROXIMITY NOTIFICATION SYSTEM

VEHICLE PROXIMITY NOTIFICATION SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK USING GTS
  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the GTS on.

  4. Enter the following menus: Body Electrical / Vehicle Proximity Notification System / Trouble Codes.

  5. Check for DTCs.


DTC CLEAR USING GTS
  1. Connect the GTS to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the GTS on.

  4. Enter the following menus: Body Electrical / Vehicle Proximity Notification System / Trouble Codes.

  5. Clear the DTCs by pressing the YES button on the GTS display.