REAR COMBINATION LIGHT ASSEMBLY > REASSEMBLY |
| 1. INSTALL REAR COMBINATION LIGHT LED |
![]() |
Install the rear combination light LED with the screw.
| 2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY |
![]() |
Engage the clamp to install the rear combination light socket and wire sub-assembly.
Connect the connector.
| 3. INSTALL BACK-UP LIGHT BULB (w/o Rear Fog Light) |
Install the back-up light bulb to the rear combination light socket and wire sub-assembly.
![]() |
Turn the rear combination light socket and wire sub-assembly with the back-up light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.
Engage the 2 guides to connect the rear combination light socket and wire sub-assembly.
| 4. INSTALL NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light) |
Install the No. 1 rear fog light bulb to the rear combination light socket and wire sub-assembly.
![]() |
Turn the rear combination light socket and wire sub-assembly with the No. 1 rear fog light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.
Engage the 2 guides to connect the rear combination light socket and wire sub-assembly.
| 5. INSTALL TAIL LIGHT BULB |
Install the tail light bulb to the rear combination light socket and wire sub-assembly.
![]() |
Turn the rear combination light socket and wire sub-assembly with the tail light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.
| 6. INSTALL REAR TURN SIGNAL LIGHT BULB |
Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.
![]() |
Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.