Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY
  1. Connect the connector.



    E308377
  1. Turn the rear combination light socket and wire sub-assembly as shown in the illustration to connect them as a unit.

  1. Engage the 2 guides to install the rear combination light socket and wire sub-assembly.



2. INSTALL BACK-UP LIGHT BULB (w/o Rear Fog Light)
  1. Install the back-up light bulb to the rear combination light socket and wire sub-assembly.



    E308375
  1. Turn the rear combination light socket and wire subassembly with the back-up light bulb as shown in the illustration to connect them as a unit.

  1. Engage the guide to connect the rear combination light socket and wire sub-assembly.



3. INSTALL NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)
  1. Install the No. 1 rear fog light bulb to the rear combination light socket and wire sub-assembly.



    E308375
  1. Turn the rear combination light socket and wire sub-assembly with the No. 1 rear fog light bulb as shown in the illustration to connect them as a unit.

  1. Engage the guide to connect the rear combination light socket and wire sub-assembly.



4. INSTALL REAR TURN SIGNAL LIGHT BULB
  1. Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.



    E308373
  1. Turn the rear combination light socket and wire subassembly with the rear turn signal light bulb as shown in the illustration to connect them as a unit.