DTC B1625/22 Side Airbag Sensor LH Circuit Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1625/22 |
|
|
| 1.CHECK SIDE AIRBAG SENSOR ASSEMBLY LH |
![]() |
Turn the power switch off.
Disconnect the cable from the negative (-) auxiliary battery terminal.
Interchange the side airbag sensor assembly LH with RH and connect the connectors.
Connect the cable to the negative (-) auxiliary battery terminal.
Clear the DTCs stored in memory (Click here).
Turn the power switch off.
Turn the power switch on (IG), and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTC B1625/22 is output. | A |
| DTC B1620/21 is output. | B |
| DTCs B1620/21 and B1625/22 are not output. | C |
Turn the power switch off.
Disconnect the cable from the negative (-) auxiliary battery terminal.
Return the side airbag sensor assembly LH and RH to their original positions and connect the connectors.
| *1 | Side Airbag Sensor Assembly RH |
| *2 | Airbag Sensor Assembly |
|
| ||||
|
| ||||
| A | ||
| ||