WIPER SWITCH > REMOVAL |
| 1. REMOVE LOWER STEERING COLUMN COVER |
Release the tilt lever, and fully extend and lower the steering column.
![]() |
Turn the steering wheel assembly to the left and remove the screw.
Turn the steering wheel assembly to the right and remove the screw.
Remove the screw from the lower portion of the lower steering column cover.
![]() |
Disengage the 4 claws and remove the lower steering column cover.
| 2. REMOVE UPPER STEERING COLUMN COVER |
![]() |
Disengage the 2 claws and remove the upper steering column cover.
| 3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY |
Turn the steering wheel assembly to the right.
![]() |
Disconnect each connector.
| *1 | Screwdriver |
Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.