FRONT WIPER RUBBER > REPLACEMENT |
| 1. REMOVE FRONT WIPER BLADE |
Pull up the holder of the front wiper blade.

| *1 | Front Wiper Arm | *2 | Holder |
| *3 | Front Wiper Blade | - | - |
Remove the front wiper blade from the front wiper arm as shown in the illustration.
| 2. REMOVE WIPER RUBBER |
![]() |
Remove the wiper rubber with the front wiper rubber backing plates from the front wiper blade.
![]() |
Remove the 2 front wiper rubber backing plates from the wiper rubber.
| 3. INSTALL WIPER RUBBER |
![]() |
Install the 2 front wiper rubber backing plates to the wiper rubber.
![]() |
Install the wiper rubber to the front wiper blade as shown in the illustration.
| 4. INSTALL FRONT WIPER BLADE |
Install the front wiper blade as shown in the illustration.

Install the holder of the front wiper blade.
| *1 | Front Wiper Blade | *2 | Holder |
| *3 | Front Wiper Arm | - | - |