OUTER REAR VIEW MIRROR > INSTALLATION |
| 1. INSTALL OUTER MIRROR COVER |
Engage the 5 claws to install the outer mirror cover.
Engage the guide.
Install the visor inner cover with the screw.
![]() |
Push the outside part of the outer mirror assembly and tilt it as shown in the illustration.
| 2. INSTALL OUTER MIRROR |
![]() |
Engage the 4 claws to install the outer mirror.
| 3. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER |
Engage the claw to install the outer rear view mirror assembly with cover with the 3 screws.
Connect the connector.
| 4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY |
![]() |
Connect the front door lock remote control cable assembly and front door inside locking cable assembly to the front door inside handle.
| *1 | Front Door Inside Locking Cable Assembly |
| *2 | Front Door Lock Remote Control Cable Assembly |
![]() |
Engage the 8 clips.
![]() |
Install the front door trim board sub-assembly with the 3 screws.
![]() |
Engage the claw and close the cover.
| 5. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) |
Connect the connector.
![]() |
Engage the 4 guides and 10 claws to install power window regulator master switch assembly with front door armrest base panel.
| 6. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) |
Connect the connector.
![]() |
Engage the 4 guides and 10 claws to install power window regulator switch assembly with front door armrest base panel.