HEADLIGHT DIMMER SWITCH > INSTALLATION |
| 1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY |
![]() |
Using pliers, expand the clamp.
![]() |
While holding the clamp expanded, engage the claw to install the headlight dimmer switch assembly as shown in the illustration.
![]() |
Release the clamp.
Connect the connector.
| 2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY |
Turn the steering wheel assembly to the right.
![]() |
Engage the claw and install the windshield wiper switch assembly.
Connect each connector.
| 3. INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY |