Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT DIMMER SWITCH

HEADLIGHT DIMMER SWITCH > REMOVAL

for Preparation Click here



1. REMOVE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
(Click here)


2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
  1. Turn the steering wheel assembly to the right.



    E237553E01
  1. Disconnect each connector.
    Text in Illustration 
    *1
    Screwdriver

  1. Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

    NOTICE:
    If the claw is pushed with excessive force, it may break.



3. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY


    E244234
  1. Disconnect the connector.

  1. Using pliers, expand the clamp as shown in the illustration.



    E244235
  1. While holding the clamp expanded, disengage the claw and remove the headlight dimmer switch assembly as shown in the illustration.