Home › Engine / Hybrid System › 1NZ-FXE EMISSION CONTROL › PURGE VALVE

PURGE VALVE > INSTALLATION

for Preparation Click here



1. INSTALL PURGE VSV
  1. Install the purge VSV.



    A275469E01
  1. Connect the 2 fuel vapor feed hoses.
    Text in Illustration 
    *a
    2 to 7 mm (0.079 to 0.276 in.)
    *b
    120°
    *c
    Front
    *d
    Up
    *e
    Paint Mark

  1. Connect the wire harness clamp.

  1. Connect the connector.