Home › Engine / Hybrid System › 1NZ-FXE EMISSION CONTROL › PCV VALVE

PCV VALVE > REMOVAL

for Preparation Click here



1. REMOVE VENTILATION VALVE SUB-ASSEMBLY


    A267679
  1. Remove the 2 bolts and wire harness.



    A267680
  1. Disconnect the No. 1 ventilation hose.



    A267681E01
  1. Using a ball joint lock nut wrench (19 mm), remove the ventilation valve sub-assembly.
    Text in Illustration 
    *1
    Ball Joint Lock Nut Wrench (19 mm)