Home › Engine / Hybrid System › 1NZ-FXE LUBRICATION › OIL PUMP

OIL PUMP > DISASSEMBLY

for Preparation Click here



1. REMOVE OIL PUMP ROTOR SET


    A265761
  1. Remove the 2 bolts and 3 screws, then remove the oil pump cover.



    A265760
  1. Remove the oil pump driven rotor and oil pump drive rotor from the oil pump body.

    NOTICE:
    Keep the 2 removed rotors without changing the arrangement or turning them over.



2. REMOVE OIL PUMP RELIEF VALVE


    A089057
  1. Remove the oil pump relief valve plug, then remove the oil pump relief valve spring and oil pump relief valve.