STEERING LOCK SYSTEM > DTC CHECK / CLEAR |
| CHECK FOR DTC (MAIN BODY ECU) |
Turn the power switch off.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / DTC.
Check for DTCs.
| CHECK FOR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)) |
Turn the power switch off.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry&Start / DTC.
Check for DTCs.
| CLEAR DTC (MAIN BODY ECU) |
Turn the power switch off.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / DTC.
Clear the DTCs.
| CLEAR DTC (CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)) |
Turn the power switch off.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry&Start / DTC.
Clear the DTCs.