Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK POWER MANAGEMENT CONTROL ECU

E186873E17


Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
A39-7 (ST1-) - G57-6 (E1)
BR - BR
Stop light switch signal
Power switch on (IG), Brake pedal released
11 to 14 V
A39-7 (ST1-) - G57-6 (E1)
BR - BR
Stop light switch signal
Power switch on (IG), Brake pedal depressed
Below 1 V
A39-23 (STP) - G57-6 (E1)
L - BR
Stop light switch signal
Brake pedal released
Below 1 V
A39-23 (STP) - G57-6 (E1)
L - BR
Stop light switch signal
Brake pedal depressed
11 to 14 V
G57-6 (E1) - Body ground
BR - Body ground
Earth (ground) circuit of power management control ECU
Always
Below 1 Ω
G57-11 (TC) - G57-6 (E1)
V - BR
Terminal TC of DLC3
Power switch on (IG)
11 to 14 V
G57-11 (TC) - G57-6 (E1)
V - BR
Terminal TC of DLC3
Terminals TC and CG of DLC3 connected
Below 1 V
G57-14 (SPDI) - G57-6 (E1)
SB - BR
Vehicle speed signal
Driving at 20 km/h (12 mph)
Pulse generation
(see waveform 1)
G58-22 (CCS) - G57-6 (E1)
L - BR
Cruise control switch circuit
Power switch on (IG)
1 MΩ or higher
G58-22 (CCS) - G57-6 (E1)
L - BR
Cruise control switch circuit
Power switch on (IG), Cruise control switch on
Below 2.5 Ω
G58-22 (CCS) - G57-6 (E1)
L - BR
Cruise control switch circuit
Power switch on (IG), +/RES switch on
235 to 245 Ω
G58-22 (CCS) - G57-6 (E1)
L - BR
Cruise control switch circuit
Power switch on (IG), -/SET switch on
617 to 643 Ω
G58-22 (CCS) - G57-6 (E1)
L - BR
Cruise control switch circuit
Power switch on (IG), CANCEL switch on
1509 to 1571 Ω
G58-24 (CA1L) - G57-6 (E1)
W - BR
CAN communication line
Power switch on (IG)
Pulse generation
(see waveform 2)
G58-25 (CA1H) - G57-6 (E1)
BE - BR
CAN communication line
Power switch on (IG)
Pulse generation
(see waveform 3)


    A111593E02
  1. WAVEFORM 1

    1. Vehicle speed signal
      Power Management Control ECU Terminal Name
      Between G57-14 (SPDI) and G57-6 (E1)
      Tester Range
      5 V/DIV., 20 msec./DIV.
      Condition
      Driving at 20 km/h (12 mph)

      HINT:
      1. The wavelength becomes shorter as the vehicle speed increases.
      2. Depending on the vehicle, the output waveform voltage may rise to 12 V if influenced by optionally installed systems.



  2. A194184E10
  3. WAVEFORM 2

    1. CAN communication signal
      Power Management Control ECU Terminal Name
      Between G58-24 (CA1L) and G57-6 (E1)
      Tester Range
      1 V/DIV., 10 msec./DIV.
      Condition
      Power switch on (IG)

      HINT:
      The waveform varies depending on the CAN communication signal.



  4. A194183E09
  5. WAVEFORM 3

    1. CAN communication signal
      Power Management Control ECU Terminal Name
      Between G58-25 (CA1H) and G57-6 (E1)
      Tester Range
      1 V/DIV., 10 msec./DIV.
      Condition
      Power switch on (IG)

      HINT:
      The waveform varies depending on the CAN communication signal.