Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK HYBRID VEHICLE CONTROL ECU

E186873E17


Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
A39-28 (ST1-) - G57-6 (E1)
BR - BR
Stop light switch signal
Power switch on (IG), Brake pedal released
11 to 14 V
A39-28 (ST1-) - G57-6 (E1)
BR - BR
Stop light switch signal
Power switch on (IG), Brake pedal depressed
Below 1.5 V
A39-14 (DB2) - G57-6 (E1)
Y - W-B
Shift position signal
Ignition switch ON, shift lever in D
11 to 14 V
A39-14 (DB2) - G57-6 (E1)
Y - W-B
Shift position signal
Ignition switch ON, shift lever not in D
11 to 14 V
A39-26 (DB1) - G57-6 (E1)
V - W-B
Shift position signal
Ignition switch ON, shift lever in D
11 to 14 V
A39-26 (DB1) - G57-6 (E1)
V - W-B
Shift position signal
Ignition switch ON, shift lever not in D
Below 1.5 V
G58-3 (BATT) - G57-6 (E1)
R - W-B
Constant power source
Always
11 to 14 V
A38-15 (STP) - G57-6 (E1)
L - BR
Stop light switch signal
Brake pedal released
Below 1.5 V
A38-15 (STP) - G57-6 (E1)
L - BR
Stop light switch signal
Brake pedal depressed
11 to 14 V
G57-6 (E1) - Body ground
BR - Body ground
Earth (ground) circuit of hybrid vehicle control ECU
Always
Below 1 Ω
G57-28 (CCS) - G57-6 (E1)
L - BR
Cruise control switch circuit
Power switch on (IG)
1 MΩ or higher
G57-28 (CCS) - G57-6 (E1)
L - BR
Cruise control switch circuit
Power switch on (IG), Cruise control switch on
Below 2.5 Ω
G57-28 (CCS) - G57-6 (E1)
L - BR
Cruise control switch circuit
Power switch on (IG), +/RES switch on
235 to 245 Ω
G57-28 (CCS) - G57-6 (E1)
L - BR
Cruise control switch circuit
Power switch on (IG), -/SET switch on
617 to 643 Ω
G57-28 (CCS) - G57-6 (E1)
L - BR
Cruise control switch circuit
Power switch on (IG), CANCEL switch on
1509 to 1571 Ω