Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (w/ Removable Headrest)

FRONT SEAT ASSEMBLY (w/ Removable Headrest) > DISASSEMBLY

for Preparation Click here


HINT:
Setting the seat cushion of the front seat assembly using the vertical adjusting handle makes it easier to perform the following procedure.



1. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    B299149
  1. Disconnect the rubber band of the separate type front seatback cover.



2. REMOVE FRONT SEAT INNER CUSHION SHIELD (for LHD Driver Side)


    B299156
  1. Disengage the 2 claws and 4 guides to remove the front seat inner cushion shield.



3. REMOVE FRONT SEAT INNER CUSHION SHIELD (for RHD Driver Side)


    B294113
  1. Disengage the 2 claws and 5 guides to remove the front seat inner cushion shield.



4. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    B307479
  1. Disengage the 2 claws and 5 guides to remove the front seat inner cushion shield.



5. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)
  1. Disengage each clamp under the front seat assembly.



    B309593
  1. Disengage the 2 clamps.

  1. Remove the nut and front seat inner belt assembly.



6. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)
  1. Disengage each clamp under the front seat assembly.



    B309594
  1. Disengage the clamp.

  1. Remove the nut and front seat inner belt assembly.



7. REMOVE SEAT ADJUSTER COVER CAP


    B299148
  1. Remove the 2 seat adjuster cover caps.



8. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    B301361E01
  1. Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.
    Text in Illustration 
    *1
    Protective Tape



9. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side)


    B301362
  1. Remove the screw and vertical adjusting handle.



10. REMOVE FRONT SEAT CUSHION SHIELD


    B301363
  1. Remove the screw.



    B301364
  1. Disengage the 2 claws, 4 guides and clip to remove the front seat cushion shield.



11. REMOVE FRONT SEAT LOWER CUSHION SHIELD (for Driver Side)


    B301365
  1. Disengage the 2 claws to remove the front seat lower cushion shield.



12. SEPARATE FRONT SEAT AIRBAG ASSEMBLY


    B301352
  1. Disengage the fastener and separate the front seat airbag assembly wire harness.



  1. for LH Side:



      B296414
    1. Disengage the claw and 6 clamps to separate the front seat airbag assembly wire harness.



  1. for RH Side:



      B296413
    1. Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.



13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


  1. for Front Passenger Side:



      B270300
    1. Disengage the clamp to remove the connector as shown in the illustration.



    B299157
  1. Disengage each hook and remove the separate type front seat cushion cover with pad.



14. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    B301353
  1. Remove the 2 hog rings.



    B301355
  1. Remove the 18 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.



15. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    B299151
  1. Remove the 5 hog rings.



    B301367
  1. Remove the 3 hog rings.



  1. Type B:



      B386949
    1. Remove the 2 hog rings.



    B301369
  1. Turn back the separate type front seatback cover.



    B299158
  1. Remove the 2 nuts and the 3 brackets.



    B296379
  1. Disengage the 4 claws and remove the 2 front seat headrest supports.

  1. Remove the separate type front seatback cover with pad.



16. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    B300261
  1. Disengage the 2 clamps.

  1. Remove the 2 nuts and the front seat airbag assembly.

    CAUTION:
    1. The nuts must not be reused.
    2. Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.



17. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    B281073
  1. Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.



18. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    B301371
  1. Remove the screw.

  1. Disengage the hook as shown in the illustration.

  1. Disengage the clip and remove the front seat lower cushion shield LH.



19. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)


    B301373
  1. Remove the screw.

  1. Disengage the hook as shown in the illustration.

  1. Disengage the clip and remove the front seat lower cushion shield RH.



20. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)


  1. Type A:



      B301375
    1. Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.



  1. Type B:



      B386945
    1. Disengage the 5 claws to remove the front seat cushion edge protector LH.



21. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)


  1. Type A:



      B301376
    1. Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.



  1. Type B:



      B386946
    1. Disengage the 5 claws to remove the front seat cushion edge protector RH.

  1. Disengage the 3 claws to remove the front seat cushion edge protector RH.



22. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)


  1. Type A:



      B301379
    1. Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.



  1. Type B:



      B386939
    1. Disengage the 5 claws to remove the front seat cushion edge protector LH.



23. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)


  1. Type A:



      B301380
    1. Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.



  1. Type B:



      B386938
    1. Disengage the 5 claws to remove the front seat cushion edge protector RH.



24. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    B301377
  1. Remove the 4 bolts.

  1. Disengage the 4 guides to remove the separate type front seatback spring assembly from the separate type front seat cushion spring assembly.



25. REMOVE SEAT TRACK ADJUSTING HANDLE


    B301378
  1. Disengage the 2 springs to remove the seat track adjusting handle from the separate type front seat cushion spring assembly.