Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH


    E150954E06
  1. Apply auxiliary battery voltage to the rear combination light assembly LH and check that the light comes on.

    OK:
    Tester Connection
    Specified Condition
    Auxiliary battery positive (+) → Terminal 2 (B)*1
    Auxiliary battery negative (-) → Terminal 1 (E)
    The back-up light comes on
    Auxiliary battery positive (+) → Terminal 3 (B)
    Auxiliary battery negative (-) → Terminal 1 (E)
    The stop light comes on
    Auxiliary battery positive (+) → Terminal 4 (B)
    Auxiliary battery negative (-) → Terminal 1 (E)
    The taillight comes on
    Auxiliary battery positive (+) → Terminal 5 (B)
    Auxiliary battery negative (-) → Terminal 1 (E)
    The turn signal light comes on
    Auxiliary battery positive (+) → Terminal 6 (B)*2
    Auxiliary battery negative (-) → Terminal 1 (E)
    The rear fog light comes on

    1. *1: w/o Rear Fog Light
    2. *2: w/ Rear Fog Light
    Text in Illustration 
    *A
    w/o Rear Fog Light
    *B
    w/ Rear Fog Light
    *a
    Component without harness connected
    (Rear Combination Light Assembly LH)
    If the result is not as specified, replace the bulb or rear combination light assembly LH.



2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH


    E150954E05
  1. Apply auxiliary battery voltage to the rear combination light assembly RH and check that the light comes on.

    OK:
    Tester Connection
    Specified Condition
    Auxiliary battery positive (+) → Terminal 2 (B)
    Auxiliary battery negative (-) → Terminal 1 (E)
    The back-up light comes on
    Auxiliary battery positive (+) → Terminal 3 (B)
    Auxiliary battery negative (-) → Terminal 1 (E)
    The stop light comes on
    Auxiliary battery positive (+) → Terminal 4 (B)
    Auxiliary battery negative (-) → Terminal 1 (E)
    The taillight comes on
    Auxiliary battery positive (+) → Terminal 5 (B)
    Auxiliary battery negative (-) → Terminal 1 (E)
    The turn signal light comes on

    Text in Illustration 
    *a
    Component without harness connected
    (Rear Combination Light Assembly RH)
    If the result is not as specified, replace the bulb or rear combination light assembly RH.